Show simple item record

dc.creatorSteinbrugge, Karl V.
dc.creatorDegenkolb, Henry J.
dc.date1969-06-30
dc.identifierhttps://bulletin.nzsee.org.nz/index.php/bnzsee/article/view/1405
dc.identifier10.5459/bnzsee.2.2.193-198
dc.descriptionA great many one and two story buildings as well as many buildings as tall as 10 stories or higher have cast in situ reinforced concrete walls designed to act as shear walls for resisting seismic forces. Allowable design stresses in reinforced concrete shear walls have been increased in recent years in many building codes, although in one major code they have been drastically reduced. Concurrently, modern architectural trends have often resulted in the reduction of certain reserve strength features neglected in seismic design such as "non-structural" panel walls of brick or of reinforced concrete since these elements are often replaced by glass or by insulated metal panels. This, in effect, results in greater applied seismic forces on the shear walls. The frequent elimination of deep spandrel beams in favor of thin slabs which may meet glass or metal walls also tends to increase stresses in the shear walls since the strength and stiffness of the spandrels were often neglected when interior shear walls existed. In summary, it has been the experience in the United States and in many other countries in the world that the effective factor of safety in reinforced concrete shear walled structures has often been substantially reduced for seismic loadings. In many cases, inadequate methods of analysis have neglected critical stresses at boundaries and openings.en-US
dc.formatapplication/pdf
dc.languageeng
dc.publisherNew Zealand Society for Earthquake Engineeringen-US
dc.relationhttps://bulletin.nzsee.org.nz/index.php/bnzsee/article/view/1405/1341
dc.rightsCopyright (c) 1969 Karl V. Steinbrugge, Henry J. Degenkolben-US
dc.rightshttps://creativecommons.org/licenses/by/4.0en-US
dc.sourceBulletin of the New Zealand Society for Earthquake Engineering; Vol 2 No 2 (1969); 193-198en-US
dc.source2324-1543
dc.source1174-9857
dc.titleA note on the earthquake performance of reinforced concrete shear wallsen-US
dc.typeinfo:eu-repo/semantics/article
dc.typeinfo:eu-repo/semantics/publishedVersion
dc.typeArticleen-US


Files in this item

FilesSizeFormatView

There are no files associated with this item.

This item appears in the following Collection(s)

Show simple item record