Show simple item record

dc.creatorWelch, David P.
dc.creatorSullivan, Timothy J.
dc.creatorFiliatrault, Andre
dc.date2014-12-31
dc.identifierhttps://bulletin.nzsee.org.nz/index.php/bnzsee/article/view/146
dc.identifier10.5459/bnzsee.47.4.253-263
dc.descriptionThe seismic assessment of an existing building is often required, possibly due to a change in use, changes in legislation (as recently occurred in New Zealand), for insurance purposes or to permit continued occupancy following a major earthquake. This discussion paper explores three ways in which Building Information Modelling (BIM) could assist in the assessment and mitigation of seismic risk: (i) BIM could provide valuable data on characteristics of both structural and non-structural elements within a building to permit a reliable and holistic seismic risk assessment to be undertaken; (ii) administer a self-diagnosis process utilising damage information received from structural health monitoring technologies prior to and following an earthquake, thus reducing the need for potentially dangerous and time-consuming physical post-earthquake inspections; and (iii) enabling realisation of an emergency management hub within a building management system for implementing control processes to monitor and eventually shutdown damaged mechanical services (e.g. gas pipes) following an earthquake, thus limiting the negative consequences of earthquake induced damage. By providing a leading-edge discussion of these three subjects, with reference to building damage observed in previous earthquakes, important directions for research in BIM are identified that promise to provide a more effective means of seismic risk assessment and mitigation.en-US
dc.formatapplication/pdf
dc.languageeng
dc.publisherNew Zealand Society for Earthquake Engineeringen-US
dc.relationhttps://bulletin.nzsee.org.nz/index.php/bnzsee/article/view/146/134
dc.rightsCopyright (c) 2014 David P. Welch, Timothy J. Sullivan, Andre Filiatraulten-US
dc.rightshttps://creativecommons.org/licenses/by/4.0en-US
dc.sourceBulletin of the New Zealand Society for Earthquake Engineering; Vol 47 No 4 (2014); 253-263en-US
dc.source2324-1543
dc.source1174-9857
dc.titlePotential of Building Information Modelling for seismic risk mitigation in buildingsen-US
dc.typeinfo:eu-repo/semantics/article
dc.typeinfo:eu-repo/semantics/publishedVersion
dc.typeArticleen-US


Files in this item

FilesSizeFormatView

There are no files associated with this item.

This item appears in the following Collection(s)

Show simple item record