Browsing New Zealand Society for Earthquake Engineering by Title
Now showing items 904-923 of 1863
-
Liquefaction induced kinematic loads on piles and inertia loads - literature review and recommendations for design
(2023-04-19)Earthquake shaking can cause soil liquefaction in certain types of soil. The associated loss of soil strength and stiffness coupled with any lateral ground movement can be damaging to buildings and their foundations. Pile ... -
Liquefaction potential and piezocone response
(1995-06-30) -
Liquefaction potential of sand-gravel mixtures: experimental observations
(2022-04-27)Case histories from at least 27 earthquakes worldwide (including three from New Zealand: 1929 Mw7.6 Murchison earthquake; 2010 Mw 7.1 Darfield earthquake; and 2016 Mw 7.8 Kaikoura earthquake) have indicated that liquefaction ... -
Liquefaction Risk Analysis of Native and Reclaimed Soil Deposits in Central Wellington
(2021-04-14)Following the 2016 Kaikōura earthquake, severe and damaging liquefaction was observed at the port of Wellington in areas of reclamation fills built at the beginning of or mid 20th century. However, little or no damage was ... -
Liquefaction susceptibility based on dissipated energy
(1996-06-30) -
Liquefaction-Induced Parabolic Subsidence Method for analysis of shallow foundations
(2024-04-09)In New Zealand, the document “Repairing and Rebuilding Houses Affected by the Canterbury Earthquakes" issued by the MBIE, has been widely embraced by consulting engineers and local authorities as a reference for building ... -
Livermore (U.S.) earthquakes / Kaiwharawhara reclamation
(1980-06-30) -
Local buckling of universal beam flanges
(1982-06-30) -
Log house performance in the 2016 Kaikoura earthquake
(2017-06-30) -
Loss estimation for insurance purposes
(1989-12-31) -
Low damage solution for a biomass boiler structure by a new three-dimensional seismic isolation
(2021-04-14)The February 2011 Christchurch earthquake caused significant property damage within Christchurch city. Since this devastating event, there has been a shift in engineering practice to Performance Based Design (PBD), to limit ... -
Low Damage Wall To Floor Connections For Seismic Resilient Timber Structures
(2023-04-19)Rocking timber walls provide superior seismic performance in comparison with conventional light timber structures. Nevertheless, there is an uplift movement at the base of the wall that is translated as vertical displacement ... -
Low rise reinforced concrete buildings of limited ductility
(1980-06-30) -
Low-Rise Buildings Guideline – Stage 1 Review
(2024-04-09)The seismic assessment of low-rise buildings is an important area of seismic assessment in New Zealand given the prevalence of these types of structures, especially outside the main centres. The Joint Committee for the ... -
Machine Learning Correction of Overpredicted Liquefaction Manifestation using Liquefaction Severity Number
(2024-04-09)Many of state-of-practice methods for predicting liquefaction manifestation, such as the Liquefaction Severity Number (LSN) of van Ballegooy et al. (2014) are known to suffer from significant overprediction in regions ... -
Macrozoning for earthquake engineering
(1972-09-30) -
Magnitudes of New Zealand earthquakes, 1901-1993
(1998-12-31) -
Mainstreaming building code practice and risk management principles towards disaster risk reduction
(2022-04-27)Global disaster impacts on the built environment have triggered the call for an operational disaster risk reduction (DRR). The application of building code requirements has shown an acceptable means of minimizing disaster ... -
Managing Seismic Risk across Process and Manufacturing Facilities
(2021-04-14)To manage seismic risk at large Process and Manufacturing Facilities requires a PCBU to understand the compliance requirements from legislation. However this is not an easy task as there are multiple Acts, Regulations, ...