Recently added

The influence of bridge geometry on the seismic behaviour of bridges  on isolating bearings

Moss, P. J.; Carr, A. J.; Cooke, N.; Kwai, Tan Fun (1986-12-31)

On California structural steel seismic design

Popov, Egor P. (1987-03-31)

Shear reinforcement of reinforced concrete inelastic interior beam-column joints

Ichinose, T. (1987-06-30)

Draft revision of NZS4203: 1984: Seismic provisions

Hutchison, D. L.; Andrews, A. L.; Butcher, G. W.; Kolston, D, (1986-09-30)

Seismic design of storage tanks 

Priestley, M. J. N.; Wood, J. H.; Davidson, B. J. (1986-12-31)

Seismic code development for steel structures

Krawinkler, Helmut (1987-06-30)

Structures of limited ductility

NZSEE Study Group (1986-12-31)

Uncertainties in attenuation relations for New Zealand seismic hazard analysis

McVerry, G. H. (1986-03-31)

Seismic design considerations of the properties of New Zealand manufactured steel reinforcing bars

Andriono, T.; Park, R. (1986-09-30)

The capacity design of reinforced concrete hybrid structures for multistorey buildings

Paulay, T.; Goodsir, W. J. (1986-03-31)

A preliminary analytic evaluation of the seismic response of structural walls failing in a shear mode

Robinson, L. M. (1986-09-30)

Horizontal timber diaphragms for wind and earthquake resistance

Smith, P. C.; Dowrick, D. J.; Dean, J. A. (1986-06-30)

Timber sheathed walls for wind and earthquake resistance

Dowrick, D. J.; Smith, P. C. (1986-06-30)

Seismic response of low-rise buildings

Moss, P. J.; Carr, A. J.; Buchanan, A. H. (1986-09-30)

Validating the sliding mechanics of office-type furniture using shake-table experiments

Yeow, Trevor Z.; MacRae, Gregory A.; Dhakal, Rajesh P.; Bradley, Brendon A. (2018-03-31)

Panel connection details in existing New Zealand precast concrete buildings

Seifi, Pouya; Henry, Richard S.; Ingham, Jason M. (2016-06-30)

New contributions to the international workshop on the seismic and retrofitting of reinforced concrete bridges Bormio, Italy, April 2-5, 1991

Park, R.; Chapman, H. E.; Cormack, L. G.; North, P. J. (1991-06-30)

Rubber bearings in base-isolated structures

Tyler, R. G. (1991-09-30)

Comparative analyses of a multi-storey frame and wall using the current and draft loadings codes

Fenwick, R. C.; Davidson, B. J. (1989-12-31)

Earthquake fault movement and town planning

Hopkins, David C. (1987-06-30)

New Zealand Society for Earthquake Engineering: Recent submissions

The influence of bridge geometry on the seismic behaviour of bridges on isolating bearings ﻿

On California structural steel seismic design ﻿

Shear reinforcement of reinforced concrete inelastic interior beam-column joints ﻿

Draft revision of NZS4203: 1984: Seismic provisions ﻿

Seismic design of storage tanks ﻿

Seismic code development for steel structures ﻿

Structures of limited ductility ﻿

Uncertainties in attenuation relations for New Zealand seismic hazard analysis ﻿

Seismic design considerations of the properties of New Zealand manufactured steel reinforcing bars ﻿

The capacity design of reinforced concrete hybrid structures for multistorey buildings ﻿

A preliminary analytic evaluation of the seismic response of structural walls failing in a shear mode ﻿

Horizontal timber diaphragms for wind and earthquake resistance ﻿

Timber sheathed walls for wind and earthquake resistance ﻿

Seismic response of low-rise buildings ﻿

Validating the sliding mechanics of office-type furniture using shake-table experiments ﻿

Panel connection details in existing New Zealand precast concrete buildings ﻿

New contributions to the international workshop on the seismic and retrofitting of reinforced concrete bridges Bormio, Italy, April 2-5, 1991 ﻿

Rubber bearings in base-isolated structures ﻿

Comparative analyses of a multi-storey frame and wall using the current and draft loadings codes ﻿

Earthquake fault movement and town planning ﻿