Recently added

Design for low/moderate seismic risk

Pinto, Paolo E. (2000-09-30)

Seismic hazard evaluation

Somerville , Paul (2000-09-30)

Performance based seismic design

Priestley, M. J. N. (2000-09-30)

Active, semi-active and hybrid control of structures

Soong , T.T.; Spencer, B.F. (2000-09-30)

Geotechnical factors in seismic design of foundations state-of-the-art report

Romo, Miguel P.; Mendoza, Manuel J.; Garcia, Silvia R. (2000-09-30)

Impacts of surface fault rupture on residential structures during the 2016 Mw 7.8 Kaikōura earthquake, New Zealand

Van Dissen, Russ J.; Stahl, Timothy; King, Andrew; Pettinga, Jarg R.; Fenton, Clark; Little, Timothy A.; Litchfield, Nicola J.; Stirling, Mark W.; Langridge, Robert M.; Nicol, Andrew; Kearse, Jesse; Barrell, David J. A.; Villamor, Pillar (2019-03-31)

Development of cladding contribution functions for seismic loss estimation

Khakurel, Shreedhar; Yeow, Trevor Z.; Chen, Frankie; Wang, Zam; Saha, Sandip K.; Dhakal, Rajesh P. (2019-03-31)

Seismic response of torsionally irregular single story structures

Au, Eu Ving; MacRae, Gregory; Pettinga, Didier; Deam, Bruce; Sadashiva, Vinod; Soleimankhani, Hossein (2019-03-31)

Preparation of small to medium-sized enterprises to earthquake disaster: Napier and Dunedin case studies

Egbelakin, Temitope; Poshdar, Mani; Walsh, Kevin Q.; Ingham, Jason; Johnston, David; Becker, Julia; Mbachu, Jasper; Rasheed, Eziaku (2018-12-31)

Evaluation of fragility functions with potential relevance for use in New Zealand

Yeow, Trevor Z.; Sullivan, Timothy J.; Elwood, Kenneth J. (2018-09-30)

Simplified moment-curvature relationship in analytical form for circular RC sections

Gentile, Roberto; Porco, Francesco; Raffaele, Domenico; Uva, Giuseppina (2018-09-30)

Implementation of the structural performance factor (Sp) within a displacement-based design framework

Marriott, Dion (2018-09-30)

A study on sensitivity of seismic site amplification factors to site conditions for bridges

Chaudhary, Muhammad Tariq A. (2018-12-31)

Comparative study on acceptance criteria for non-ductile reinforced concrete columns

Opabola, Eyitayo; Elwood, Kenneth J. (2018-12-31)

Reflections on New Zealand’s earthquake resistant design approach: Can it be improved?

Kirkcaldie, Donald K. (2018-12-31)

A macromodel substitute for simple prediction of the lateral behaviour of composite shear walls

Behnamfar, Farhad; Shakeri, Esmail; Makhdoumi, Akbar (2018-09-30)

Discussion on “Minimum vertical reinforcement in RC walls: Theoretical requirements for low and high ductility demands”

Morris, Gareth (2018-09-30)

Cyclic response analysis of high-strength self-compacting concrete beam-column joints: Numerical modelling and experimental validation

Ashtiani, Mohammad Soleymani; Dhakal, Rajesh P.; Scott, Allan N. (2018-03-31)

Experimental in-plane performance of insulated concrete and brick masonry wall panels retrofitted using polymer composites

Ismail, Najif; El-Maaddawy, Tamer; Najmal, Amanullah; Khattak, Nouman (2018-06-30)

The estimated PGA map of the Mw6.4 2006 Yogyakarta Indonesia earthquake, constructed from the Modified Mercalli intensity IMM

Pawirodikromo, Widodo (2018-06-30)

New Zealand Society for Earthquake Engineering: Recent submissions

Design for low/moderate seismic risk ﻿

Seismic hazard evaluation ﻿

Performance based seismic design ﻿

Active, semi-active and hybrid control of structures ﻿

Geotechnical factors in seismic design of foundations state-of-the-art report ﻿

Impacts of surface fault rupture on residential structures during the 2016 Mw 7.8 Kaikōura earthquake, New Zealand ﻿

Development of cladding contribution functions for seismic loss estimation ﻿

Seismic response of torsionally irregular single story structures ﻿

Preparation of small to medium-sized enterprises to earthquake disaster: Napier and Dunedin case studies ﻿

Evaluation of fragility functions with potential relevance for use in New Zealand ﻿

Simplified moment-curvature relationship in analytical form for circular RC sections ﻿

Implementation of the structural performance factor (Sp) within a displacement-based design framework ﻿

A study on sensitivity of seismic site amplification factors to site conditions for bridges ﻿

Comparative study on acceptance criteria for non-ductile reinforced concrete columns ﻿

Reflections on New Zealand’s earthquake resistant design approach: Can it be improved? ﻿

A macromodel substitute for simple prediction of the lateral behaviour of composite shear walls ﻿

Discussion on “Minimum vertical reinforcement in RC walls: Theoretical requirements for low and high ductility demands” ﻿

Cyclic response analysis of high-strength self-compacting concrete beam-column joints: Numerical modelling and experimental validation ﻿

Experimental in-plane performance of insulated concrete and brick masonry wall panels retrofitted using polymer composites ﻿

The estimated PGA map of the Mw6.4 2006 Yogyakarta Indonesia earthquake, constructed from the Modified Mercalli intensity IMM ﻿