Browsing New Zealand Society for Earthquake Engineering by Title
Now showing items 1439-1458 of 1863
-
Seismic strengthening of columns by adding new concrete
(2007-06-30) -
Seismic strengthening of RC walls using FRP to prevent axial failure
(2023-04-19)Reinforced concrete (RC) walls with insufficient compressive strain capacity at the boundary region are vulnerable to premature axial failure, limiting the drift capacity. A solution to strengthen these deficient RC walls ... -
Seismic strengthening of the Seatoun Tunnel
(2022-04-27)The Seatoun tunnel is a 147m long, vehicle and pedestrian tunnel built in 1906-1907 to provide a tram connection between the suburb of Seatoun the city of Wellington. In 2011, the Seatoun tunnel structure was assessed as ... -
Seismic Strengthening Auckland's Waterfront
(2021-04-14)Seawalls were constructed in sections between 1879 and 1925 to form Quay Street on the waterfront of Downtown Auckland. These seawalls have essentially remained structurally unchanged since they were first constructed and ... -
Seismic structural monitoring in Wellington using advanced seismological techniques
(2022-04-27)Sklodowska et al. (2021) employed advanced seismological techniques usually applied to Earth studies to the Te Puni building (instrumented as part of the GeoNet building instrumentation programme) for the 2009-2017 ... -
Seismic torsional effects on buildings
(1976-03-31) -
Seismic upgrading of friction-damped steel frames integrated with self-centring devices
(2021-04-14)Conventional friction-based damping devices are known for their large energy dissipation capacity and economic benefits compared to other seismic mitigation systems. These devices have been implemented in many practical ... -
Seismotectonics and earthquake risk macrozoning
(1979-03-31) -
Self-centring bracing system: avoidance of elastic buckling for braces with one intermediate damper
(2020-04-22)Today, more attention is being given to timber material by practitioners as a structural member owing to benefits that this material can offer such as high strength to weight ratio, being environmentally friendly and ... -
Self-drilling dowel connections for ductile link beams in coupled CLT walls
(2021-04-14)Coupled CLT walls with steel link beams can form a more efficient lateral load resisting system for tall timber buildings when compared to single CLT shear walls. To achieve adequate coupling between CLT walls and ensure ... -
Semi-active MR dampers for seismic control of structures
(2009-09-30) -
Seminar and symposium on earthquake engineering
(1970-03-31) -
Seminar on geotechnical aspects of earthquake engineering
(1970-09-30) -
Separation of non-structural components in buildings
(1976-09-30) -
SESOC Retaining Wall Design Guide - Methodology and Validation
(2024-04-09)Some years in development, the SESOC Cantilever Timber Pole Retaining Wall Design Guide has been prepared in response to the need for a comprehensive, coherent design basis, albeit for low rise, cantilever, walls. Though ... -
SESOC Software – Seismic Design Tools
(2021-04-14)SESOC has accumulated a number of structural software design programs, over time, which we actively maintain/enhance, also on occasion developing a new tool for the benefit of our members – and the NZ design fraternity. This ...