Browsing Proceedings of the 2021 New Zealand Society for Earthquake Engineering Annual Technical Conference by Title
Now showing items 56-75 of 115
-
Incorporating the influence of duration on dynamic deformation capacity in seismic assessment
(2021-04-14)The dynamic deformation capacity of a structure is the peak storey drift ratio it can safely withstand without collapsing due to dynamic instability. In a previous study, the authors developed a robust procedure to compute ... -
Influence of damping models on nonlinear seismic response of a base isolated building
(2021-04-14)This paper discusses the effect of different damping models on nonlinear seismic response of a 8 storey 2D base isolated (BI) building: (1) Rayleigh damping proportional to the mass and initial stiffness matrices, (2) ... -
Innovative seismic upgrade of Left Bank Art Gallery, Greymouth.
(2021-04-14)The Grey District Council commissioned the strengthening of the C1910 Left Bank Art Galley building in 2018 to preserve its historical value and improve the building’s seismic safety rating. Formally the Bank of New Zealand ... -
Investigating CLT Lateral Load Resisting Systems for Taller Timber Buildings
(2021-04-14)Recent taller timber buildings worldwide have often utilized hybrid systems of mixed materials and have been built in regions of low seismicity. Designers often adopt the hybrid material solution of utilizing mass timber ... -
Investigating the impact of design criteria on the expected seismic losses of an office building
(2021-04-14)Low Damage Seismic Design (LDSD) guidance material being developed by Engineering NZ is considering a design drift limit for multi-storey buildings of 0.5% at a new damage control limit state (DCLS). The impact of this new ... -
Investigation of the Plastic Drift Capacity of RC Frames with Beam-Column Joint Failure
(2021-04-14)MBIE/NZSEE guidelines have various methods to assess existing buildings, of which Displacement Based Assessment (DBA) is one. This paper reports on the application of DBA to reinforced concrete (RC) frames where beam-column ... -
Investigation of vertical reinforcement termination in lightly reinforced concrete walls
(2021-04-14)Reinforced concrete (RC) structural walls are effective lateral force-resisting components commonly implemented in tall buildings. Recent studies have investigated the impact of minimum vertical reinforcement limits on the ... -
Is the bar too high? Foundation settlement in post-earthquake Christchurch
(2021-04-14)Three case studies are presented to show how significant ground deformation occurred with the Canterbury earthquake sequence, which in turn resulted in slopes to shallow foundations. The case studies are all from the ... -
Liquefaction Assessment of Reclaimed Land at CentrePort
(2021-04-14)The 2016 Mw7.8 Kaikōura earthquake caused widespread liquefaction in the port of Wellington (CentrePort), New Zealand which produced substantial lateral ground movements along with global and differential settlement. ... -
Liquefaction Risk Analysis of Native and Reclaimed Soil Deposits in Central Wellington
(2021-04-14)Following the 2016 Kaikōura earthquake, severe and damaging liquefaction was observed at the port of Wellington in areas of reclamation fills built at the beginning of or mid 20th century. However, little or no damage was ... -
Low damage solution for a biomass boiler structure by a new three-dimensional seismic isolation
(2021-04-14)The February 2011 Christchurch earthquake caused significant property damage within Christchurch city. Since this devastating event, there has been a shift in engineering practice to Performance Based Design (PBD), to limit ... -
Managing Seismic Risk across Process and Manufacturing Facilities
(2021-04-14)To manage seismic risk at large Process and Manufacturing Facilities requires a PCBU to understand the compliance requirements from legislation. However this is not an easy task as there are multiple Acts, Regulations, ... -
Monitoring of lateral stiffness changes for a real building using hysteresis loop analysis
(2021-04-14)The BNZ building in Wellington, New Zealand was significantly damaged, and eventually demolished, due to the cumulative impact of three main earthquakes between 2013 and 2016. Although the building was equipped with a set ... -
Monotonic and Cyclic Pushover Testing of Isolated Piles of the Whirokino Trestle
(2021-04-14)In New Zealand, over 60% of State Highway bridges were designed and built during eras with low seismic provisions and most of these bridges are supported by pile foundations. An improved understanding of the in-service ... -
Numerical modelling of a concrete wall-steel frame building
(2021-04-14)Buildings that use concrete walls together with steel frames have become increasingly common in Christchurch, with around 35% of post-earthquake buildings using such mixed-material structural systems. This rapid shift in ... -
NZ Low Damage Seismic Design Guidance Information
(2021-04-14)In a resilient built environment, buildings should be able to be occupied and used after significant earthquakes. New Zealand’s Building Code, like many others, is primarily focused on the preservation of life, with damage ... -
Outlook for earthquake early warning for Aotearoa New Zealand: Insights from initiating a community-of-practice
(2021-04-14)A community-of-practice (CoP) is a community that comprises of members that build relationships with each other to create technical advancements motivated by shared goals. Establishing communities-of-practice has been ... -
Panel Discussion - Towards a Resilient Future
(2021-04-14)Many lessons have been learnt from the major earthquakes in the past that have helped New Zealand become more resilient to earthquakes. But society’s circumstances, perspectives, and expectations are ever changing. How do ... -
Parallel scalability of OpenSees for 2D and 3D ground response analysis problems
(2021-04-14)This study investigates the parallel scalability of the OpenSees finite element analysis platform in the context of 2D and 3D ground response analyses. A series of 2D and 3D models ranging from 7500 to 480000 elements are ... -
Performance Comparison of Buckling-Restrained Braces and Friction Dampers Adopted for Retrofit of an Existing RC Frame Building Using Performance-Based Retrofit Procedure
(2021-04-14)This paper presents a performance-based retrofit approach for designing and performance comparison of Buckling -Restrained Braces (BRBs) and Friction Dampers as retrofit strategies for RC frame buildings. An overview of ...