Recently added

Structural fuses and concrete-filled steel shapes for seismic and multi-hazard resistant design

Bruneau, Michel; El-Bahey, Samer; Fujikura, Shuichi; Keller, David (2011-03-31)

Spatial distribution of ground shaking in characteristic earthquakes on the Wellington and Alpine faults, New Zealand, estimated from a distributed-source model

Dowrick, David J.; Rhoades, David A. (2011-03-31)

The GeoNet building instrumentation programme

Uma, S.R.; King, Andrew; Cousins, Jim; Gledhill, Ken (2011-03-31)

The origin of resonance in the vertical component of earthquakes recorded on soft soil at Wainuiomata, New Zealand

Stephenson, W. R. (2011-03-31)

General observations of effects of the 30th September 2009 Padang earthquake, Indonesia

Bothara, Jitendra; Beetham, Dick; Brunsdon, Dave; Stannard, Mike; Brown, Roger; Hyland, Clark; Lewis, Warren; Miller, Scott; Sanders, Rebecca; Sulistio, Yakso (2010-09-30)

A distributed-source approach to modelling the spatial distribution of MM intensities resulting from large crustal New Zealand earthquakes

Dowrick, D. J.; Rhoades, D. A. (2010-06-30)

Building safety evaluation following the 30 September 2009 Padang earthquake, Indonesia

Brunsdon, Dave; Bothara, Jitendra; Stannard, Mike; Beetham, Dick; Brown, Roger; Hyland, Clark; Lewis, Warren; Miller, Scott; Sanders, Rebecca; Sulistio, Yakso (2010-09-30)

Using upper storeys as semi-active tuned mass damper building systems

Chey, M. H.; Rodgers, Geoffrey W.; Chase, J. Geoffrey; Mander, John B. (2010-06-30)

Seismic actions on acceleration sensitive non-structural components in ductile frames

Uma, S. R.; Zhao, John X.; King, Andrew B. (2010-06-30)

Prevalence of New Zealand’s unreinforced masonry buildings

Russell, Alistair P.; Ingham, Jason M. (2010-09-30)

The sliding hinge joint moment connection

MacRae, Gregory A.; Clifton, G. Charles; Mackinven, Hamish; Mago, Nandor; Butterworth, John; Pampanin, Stefano (2010-09-30)

Plastic hinge locations in steel columns

MacRae, Gregory A.; Lu, Arthur Y. C.; Peng, Brian H. H.; Hann, Chris; Ziemian, Ron; Clifton, G. Charles (2010-03-31)

Microtremor coherency

Stephenson, W. R. (2010-03-31)

The Mw 7.6 Dusky Sound earthquake of 2009

Fry, Bill; Bannister, Stephen; Beavan, John; Bland, Lara; Bradley, Brendon; Cox, Simon; Cousins, Jim; Gale, Nora; Hancox, Graham; Holden, Caroline; Jongens, Richard; Power, William; Prasetya, Gegar; Reyners, Martin; Ristau, John; Robinson, Russell; Samsonov, Sergey; Wilson, Kate; GeoNet team (2010-03-31)

New Zealand Society for Earthquake Engineering: Recent submissions

Structural fuses and concrete-filled steel shapes for seismic and multi-hazard resistant design

Spatial distribution of ground shaking in characteristic earthquakes on the Wellington and Alpine faults, New Zealand, estimated from a distributed-source model

The GeoNet building instrumentation programme

The origin of resonance in the vertical component of earthquakes recorded on soft soil at Wainuiomata, New Zealand

General observations of effects of the 30th September 2009 Padang earthquake, Indonesia

A distributed-source approach to modelling the spatial distribution of MM intensities resulting from large crustal New Zealand earthquakes

Building safety evaluation following the 30 September 2009 Padang earthquake, Indonesia

Using upper storeys as semi-active tuned mass damper building systems

Seismic actions on acceleration sensitive non-structural components in ductile frames

Prevalence of New Zealand’s unreinforced masonry buildings

The sliding hinge joint moment connection

Plastic hinge locations in steel columns

Microtremor coherency

The Mw 7.6 Dusky Sound earthquake of 2009

Customising semi-active resetable device behaviour for abating seismic structural response

Determination of structural irregularity limits

The Ms 8.0 Wenchuan earthquake of 12 May 2008 reconnaissance report

Direct Displacement-Based Design of a RC wall-steel EBF dual system with added dampers

Semi-active MR dampers for seismic control of structures

Lateral stress effects on liquefaction resistance correlations

New Zealand Society for Earthquake Engineering: Recent submissions

Structural fuses and concrete-filled steel shapes for seismic and multi-hazard resistant design ﻿

Spatial distribution of ground shaking in characteristic earthquakes on the Wellington and Alpine faults, New Zealand, estimated from a distributed-source model ﻿

The GeoNet building instrumentation programme ﻿

The origin of resonance in the vertical component of earthquakes recorded on soft soil at Wainuiomata, New Zealand ﻿

General observations of effects of the 30th September 2009 Padang earthquake, Indonesia ﻿

A distributed-source approach to modelling the spatial distribution of MM intensities resulting from large crustal New Zealand earthquakes ﻿

Building safety evaluation following the 30 September 2009 Padang earthquake, Indonesia ﻿

Using upper storeys as semi-active tuned mass damper building systems ﻿

Seismic actions on acceleration sensitive non-structural components in ductile frames ﻿

Prevalence of New Zealand’s unreinforced masonry buildings ﻿

The sliding hinge joint moment connection ﻿

Plastic hinge locations in steel columns ﻿

Microtremor coherency ﻿

The Mw 7.6 Dusky Sound earthquake of 2009 ﻿

Customising semi-active resetable device behaviour for abating seismic structural response ﻿

Determination of structural irregularity limits ﻿

The Ms 8.0 Wenchuan earthquake of 12 May 2008 reconnaissance report ﻿

Direct Displacement-Based Design of a RC wall-steel EBF dual system with added dampers ﻿

Semi-active MR dampers for seismic control of structures ﻿

Lateral stress effects on liquefaction resistance correlations ﻿

Structural fuses and concrete-filled steel shapes for seismic and multi-hazard resistant design

Spatial distribution of ground shaking in characteristic earthquakes on the Wellington and Alpine faults, New Zealand, estimated from a distributed-source model

The GeoNet building instrumentation programme

The origin of resonance in the vertical component of earthquakes recorded on soft soil at Wainuiomata, New Zealand

General observations of effects of the 30th September 2009 Padang earthquake, Indonesia

A distributed-source approach to modelling the spatial distribution of MM intensities resulting from large crustal New Zealand earthquakes

Building safety evaluation following the 30 September 2009 Padang earthquake, Indonesia

Using upper storeys as semi-active tuned mass damper building systems

Seismic actions on acceleration sensitive non-structural components in ductile frames

Prevalence of New Zealand’s unreinforced masonry buildings

The sliding hinge joint moment connection

Plastic hinge locations in steel columns

Microtremor coherency

The Mw 7.6 Dusky Sound earthquake of 2009

Customising semi-active resetable device behaviour for abating seismic structural response

Determination of structural irregularity limits

The Ms 8.0 Wenchuan earthquake of 12 May 2008 reconnaissance report

Direct Displacement-Based Design of a RC wall-steel EBF dual system with added dampers

Semi-active MR dampers for seismic control of structures

Lateral stress effects on liquefaction resistance correlations